Line output converter can be defined as a small device that converts high-voltage speaker signals preamp signals are acceptable, an amplifier. If u mean an amplifier to your car stereo, do not want to connect via a speaker-level inputs, then you need a line output converter with a preamp outputs have. This allows you to connect your amplifier to a receiver by your receiver speaker output in pre-amp signals. It consists of a transformer and (10 to 20 watts), a high voltage resistance and a connection to amplifier with RCA patch cable. The amplifier in the head unit is loaded by the resistance. It was also to draw an adjustable gain function output.Most of the line output converters have cable to the transformer ground. When the head unit is "on" the voltage on the output speaker cable is almost half of the DC battery and can change rapidly, if it is "on" is. Whereas if the device is "off", the voltage is 0 volts DC. As we have already said that the head of the unit is a large rapid rise of the DC voltage when the main unit is turned on. The transformer provides the variation of the tension between the two input terminals. Since the DC voltage increases simultaneously on both input terminals, then the rhythm of the DC is irretrievable. There are different types of line output converters available in the market, but Gizmo Peripheral remained the industry leader in high-LOC.
There are simple instructions for the line output converter, which must be considered. To connect the audio cable from speaker leads to the device from the car stereo. The line output converter then trims all inward bound audio speakers to the outgoing signals to get to adjust the preamp inputs on the amplifier. An adapter Scosche conducts many different applications. It accepts speaker outputs and converts them into pre-amp outputs. It has a fader function also means that we can 2-channel amplifier and 4-channel amplifier easily hook can not lose, and faders.
Adjustable Line Output Converter helps to convert the radio-speaker-level output at the lower-level amplifier RCA input. Installers use to their speaker-level stereo RCA conversion levels with the help of Hi / low adapter, car stereo with an external amplifier hook. Hi / Low Converters with 2 channels and 4 channels are available with or without adaptations. It is important to note that the match between your car stereo and amplifier are the same. Adjustable Hi / Low converter allows the fine tuning of the hi / low-fit device to a level in the car and are the most popular in adjustable output voltage converter. There are many adjustable output voltage converters in 2 channels and 4 channels. For example, SoundGate "LOC A" adjustable high Hi / Low adapter has full electrical isolation and handles 40 watts and Soungate "XR4" continues this dual functions as an aftermarket receiver, a factory amplifier system to add or four stations Add amplifier, a factory receiver. This function can make adjustments on all four channels.
